Transmitter AMS 5200

The transmitter AMS 5200 is the control, support and evaluation unit for the AMS Flue gas probes. It features state-of-the-art micro processor technology. An extensive range of accessories and flue gas probes allows the use of the transmitter AMS 5200 for almost every application.

Currently, a TÜV certification according to European and German environmental regulations is prepared for the AMS 5200.

An accessory for the AMS 5200 is a software for remote service and control. Remote service via Ethernet or Internet is most common in conjunction with continous emission monitoring system, especially for the electronic measuring data processing. Remote service increases the availability of a measuring system, and reduces the cost for service and downtime.

AMS 5200

The O2 transmitter AMS 5200 can be integrated into a computer network by wireless ethernet using the bi-directional RS 232 interface on the Transmitter. This allows the direct access of the AMS service engineer to the service and programm settings of the O2 transmitter. Since access to the AMS 5200 is only possible via a direct dialogue between the on-site personnell and the AMS service engineer, the safety and integrity of the computer network is guaranteed at all times.


Technical data

ransmitter AMS 5200
Measuring principle ZrO2 sensor with Pt electrodes
Application Soldering machines, OEM application, Gases Industries, Chemical Industries
Probes  AMS 3211-000 / 500 / 600 / 700 / 860 Ex
Measuring range 0 … 25 Vol %
Analogue signal port (0) 4 … 20 mA or 0 … 10V, galvanically separated
Reproducability +/- 2 % of the measuring value
Resolution C(O2) – 0,01 %
T90-Time ca. 20 Seconds
Display 2* 16 digit, illuminated LCD display
Line 1: Display of concentration in ppm or Vol %
Line 2: Messages, device status, sensor parameters
Messages 1 system message (measuring value yes / no)
max. 2 messages configurable as oxygen value,
calibration message,
measuring value in the range,
flow rate
Digital communication serial interface RS232
Ambient operating temp. + 5 °C up to + 60 °C
Power supply 110 … 230 VAC or 24 VDC
Protection / Housing / IP65 / wall mounting housing / ca. 300 x 260 x 130 mm (hxbxt)
Dimensions Ex-d housing for Zone 1 / ca. 300 x 250 x 200 mm (hxbxt)
Weight 3,5 kg … 10 kg depending on housing
Options pneumatic unit for supplying the probes with reference gas and / or calibration gas
automatic calibration by using a pneumatic unit
Version: AMS 5200 E V-2013-07