Analyser AMS 5225
Measuring principle Electrochemical oxygen sensor
Application Soldering machines
  Gases Industries
  Chemical Industries
Measuring range  
  0 … 25 Vol %
Analogue signal port (0) 4 … 20 mA or 0 … 10V, galvanically separated
Reproducability +/- 2 % of the measuring value
Resolution 0,01%
T90-Time ca. 20 Seconds
Display 2* 16 digit, illuminated LCD display
  1. Line: display of concentration in ppm or Vol %
  2. Line: Messages, device status, sensor parameters
Messages 1 system message (measuring value yes / no)
  max. 2 messages configurable as oxygen value,
  calibration message, measuring value in the range, flow rate
Gas connection inlet / outlet 3 / 6 mm ferrule pack
Sample flow min. 30 Nl/h, max. 50 Nl/h
Sample pressure (inlet) min. 1,01 bar abs., max. 10 bar abs.
Digital communication serial interface RS232
Ambient operating temp. + 5 °C up to + 60 °C
Power supply 110 … 230 VAC or 24 VDC
Protection / Housing / IP20 / electronics unit 28 TE / 3HU
Dimensions IP65 / wall mounting housing / ca. 300 x 260 x 130 mm (hxbxt)
  IP54 / portable housing 42 TE / 3 HU
  IP 54 / panel mounting 144 x 144 mm
  Ex-d housing for Zone 1 / ca. 300 x 250 x 200 mm (hxbxt)
Weight 2,5 kg … 10 kg depending on housing and built-in options
Options Pneumatic pump
  Electronic flow analysis
  Software for remote display and service
  max. 4 measuring ranges automatically switching with
  digital range detection
  Auto-calibration
  Pressure regulator
  Flowmeter
Version: AMS 5225 E V01-2010-12